新聞中心
滾珠絲桿零部件的組裝要注意什么？
來源：http://m.306135.com/ 日期：2021-07-06 發布人：
1、滾珠絲桿必須保持干凈，擦拭清潔，不使異物進入螺母內。
1. The ball screw must be kept clean and wiped to prevent foreign matters from entering the nut.
2、不可任意敲打，并保持外觀不碰傷。
2. Don't knock at will, and keep the appearance from bumping.
3、安裝面的表面修整及清潔要徹底。
3. Finish and clean the surface of the mounting surface thoroughly.
4、合宜的公差及精確的校正，保證絲桿運行無阻力。
4. Proper tolerance and accurate correction ensure that the screw rod runs without resistance.
5、適宜的潤滑，加合適的潤滑脂。
5. Proper lubrication, add proper grease.
6、不可將絲桿與螺母分離。
6. Do not separate the screw rod from the nut.
7、更好在絲桿兩端加裝防撞器，以免運轉超過行程極限而損傷滾珠絲桿。
7. It is better to install anti-collision devices at both ends of the screw to avoid damage to the ball screw due to exceeding the travel limit.
8、使用保護套來保護滾珠絲桿，以免異物運行進入損壞絲桿。
8. Use a protective sleeve to protect the ball screw to prevent foreign matters from entering and damaging the screw.
9、滾珠絲桿涂以鋰基潤滑脂潤滑。
9. The ball screw is lubricated with lithium grease.
- 上一篇：直線導軌如何清楚渣滓粉塵
- 下一篇：滾珠絲杠反相器的作用是什么？
導軌絲杠：從設計結構...<>
大型絲杠的性能設計介...<>
梯形絲杠和滾珠絲杠的...<>- 滾珠絲桿目前的行業的...<>
- 滾珠絲杠螺母油封更換...<>
相關：
