1、 The lubrication requirements of linear guide rail are to reduce friction resistance, reduce driving power and improve efficiency.

減少導軌磨損，防止導軌腐蝕。

Reduce guide rail wear and prevent guide rail corrosion.

避免低速重載下發生爬行現象，并減少振動。

Avoid crawling under low speed and heavy load and reduce vibration.

降低高速時摩擦熱，減少熱變形。

Reduce friction heat at high speed and reduce thermal deformation.

二、直線導軌潤滑油的選擇選用直線導軌潤滑油時主要考慮的因素有兩點根據不同類型，可選同時用作液壓介質的導軌潤滑油；既要滿足導軌的要求，又是滿足液壓系統的要求。

2、 Selection of lubricating oil for linear guide rail there are two main factors to be considered when selecting lubricating oil for linear guide rail. According to different types, guide rail lubricating oil can be used as hydraulic medium at the same time; It should not only meet the requirements of guide rail, but also meet the requirements of hydraulic system.

按滑動速度和平均壓力來選擇潤滑油脂的黏度及附著力。

The viscosity and adhesion of lubricating grease are selected according to sliding speed and average pressure.

三、滾珠絲桿導軌潤滑脂的要求◆低摩擦系數，扭矩小，提高絲桿的效率，并延長使用壽命◆優良的高速潤滑性和承載能力，與多數塑料相容◆良好的抗微動磨損保護，可降低滑動摩擦微震動產生的機械噪聲，并維持長久減噪效果 。

3、 Requirements for ball screw guide grease ◆ low friction coefficient, small torque, improve screw efficiency and prolong service life ◆ excellent high-speed lubricity and bearing capacity, compatible with most plastics ◆ good anti fretting wear protection, which can reduce mechanical noise caused by sliding friction micro vibration and maintain long-term noise reduction effect.

現時市場流通的：NSK、THK、西門子和環球高速機的導桿、滑軌X/Y軸專用脂。

Excellent brands circulating in the market at present: NSK, THK, Siemens and special grease for guide rod and slide rail X / Y axis of universal high-speed machine.

四、在導軌上涂抹潤滑脂的好處與選擇方式附著力好的潤滑脂能將固體潤滑劑覆蓋在導軌的摩擦表面上，形成黏結型固體潤滑膜，以降低摩擦，減少磨損。

4、 The advantages and selection of applying grease on the guide rail the grease with good adhesion can cover the solid lubricant on the friction surface of the guide rail and form an adhesive solid lubricating film to reduce friction and wear.

固體潤滑劑種類較多，按基本原料可分為金屬類、金屬化合物類、無機物類和有機物類。

There are many kinds of solid lubricants, which can be divided into metal, metal compound, inorganic and organic according to the basic raw materials.

在潤滑油脂中添加固態潤滑劑粉末，增強或改善潤滑油脂的承載能力、時效性能和高低溫性能。

Adding solid lubricant powder to lubricating grease can enhance or improve the bearing capacity, aging performance and high and low temperature performance of lubricating grease.

以上是關于導軌絲杠的詳細信息，如有疑問，請致電聯系，有人員為你解答。

The above is about the guide screw http://m.306135.com If you have any questions, please call and someone will answer for you.